Tacoma 4WD V6-4.0L (1GR-FE) (2006)
Crankshaft Main Bearing Seal: Service and Repair
ENGINE REAR OIL SEAL
REMOVAL
1. REMOVE TRANSMISSION ASSEMBLY
2. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)
a. Using SST, hold the crankshaft.
SST 09213-54015 (91651-60855), 09330-00021
b. Remove the 8 bolts, then remove the flywheel and 2 spacers.
3. REMOVE DRIVE PLATE & RING GEAR SUBASSEMBLY (for Automatic Transmission)
a. Using SST, hold the crankshaft.
SST 09213-54015 (91651-60855), 09330-00021
b. Remove the 8 bolts, then remove the drive plate and 2 spacers.