Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1327001.png)
Control Assembly: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE CONTROL KNOB SUB-ASSEMBLY
a. Remove the 3 control knob sub-assemblies.
2. REMOVE HEATER CONTROL PANEL
a. Remove the 4 screws.
b. Using a screwdriver, disengage the 6 claws and remove the heater control panel.
HINT: Tape up the screwdriver tip before use.
3. REMOVE A/C SWITCH
a. Using a screwdriver, pry out the A/C switch.
HINT: Tape up the screwdriver tip before use.
