toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Steering - Rattling Noise On Rough Roads|Page 8936 > < Steering - Rattling Noise On Rough Roads|Page 8934

Tacoma 4WD V6-4.0L (1GR-FE) (2006)

Page 5
background image

9. Install the NEW steering intermediate shaft.

A. Align the matchmarks and install the intermediate shaft to the steering column first.

B. Align the matchmarks and install the intermediate shaft to the lower intermediate shaft.

NOTICE

Make sure the intermediate shaft is in the correct position when installing.

10. Install the NEW bolt.

Torque: 35 N*m (357 kgf*cm, 26 ft*lbf)

Steering - Rattling Noise On Rough Roads|Page 8936 > < Steering - Rattling Noise On Rough Roads|Page 8934