toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Customer Interest: > < Horn Relay|Locations|Page 9187
Page 1
background image

License Plate Lamp: All Technical Service Bulletins
Lighting - Rear License Plate Lamp Dilodged

ENGINE
EG042-07
REVISED

Title:
M.I.L. "ON" DTC P0601, P0606,
AND/OR P0607 OR ENGINE
"NO START" CONDITION

Models:
'05 - '07 Corolla & Matrix (1ZZ-FE)

October 13, 2007

Introduction

During adverse driving conditions the build-up of snow, ice, or mud on the rear license plate lamp housing may cause the lamp to dislodge from the rear
bumper. New lamp assemblies have been developed to remedy this condition. Replace the parts in pairs only (LH & RH).

Applicable Vehicles

^

2005 - 2007 model year Tacoma vehicles produced BEFORE the Production Change Effective VINs shown below.

Production Change Information

Parts Information

Repair Procedure

Replace both license plate lamp assemblies if the bulb sockets are damaged or the bulb housings are loose in the bumper assembly.

Warranty Information

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Customer Interest: > < Horn Relay|Locations|Page 9187