Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-356003.png)
(h) Select "SIGNAL CHECK" on the intelligent tester.
(i) Confirm that the transmitter IDs and the data of tire pressure of all the tires are displayed on the intelligent tester screen.
NOTICE:
-
It may take up to 1 minute to update the tire pressure data.
-
If the IDs have not been registered, DTC C2171/71 is set in the tire pressure warning ECU after approximately 30 minutes.
(j) Disconnect the intelligent tester with the ignition switch turned OFF.
