Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-779003.png)
t.
Connect the fuel tube.
3. CHECK FOR FUEL LEAKAGE
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch to ON.
NOTE: Do not start the engine.
c. Turn the intelligent tester ON.
d. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / FUEL PUMP / SPD / ON.
e. Check that there are no leakage in the fuel system.
