Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-852003.png)
Calibration Identification Chart
Inspection Procedure
1.
If the vehicle is currently exhibiting a "no start" condition, refer to the Technical Information System (TIS) for the diagnostic procedure.
^
2006 model year Tacoma Repair Manual, Engine/Hybrid System - Engine Control System - "1GR-FE Engine Control System: SF1 System:
Basic Inspection".
NOTE:
When the intermittent "no start" condition is related to the ECM (PCM) issue, there will be NO injector pulse during cranking on the first starting
attempt. After one ignition key cycle, the vehicle will start.
2.
If the vehicle exhibits the above conditions, flash reprogram the ECM (PCM) following the repair procedure below.
Repair Procedure
