Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1413001.png)
Seat Belt: Service and Repair
Front Center Seat Outer Belt (For Bench Seat Type)
REMOVAL
1. REMOVE BACK PANEL TRIM COVER
a. Disengage the 6 claws and remove the back panel trim cover.
HINT: Follow the same procedures as for the opposite side.
b. Disengage the 6 claws and remove the back panel trim cover.
2. REMOVE BACK PANEL UPPER GARNISH
3. REMOVE SEAT BELT RETRACTOR COVER
a. Disengage the 4 clips and remove the seat retractor cover.
4. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY
