Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1416002.png)
a. Remove the bolt and floor anchor of the front seat outer belt.
b. Remove the clip.
c. Disengage the 9 clips and remove the rear door trim board.
7. REMOVE ACCESS PANEL INSIDE HANDLE SUB-ASSEMBLY
8. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
a. Remove the nut and shoulder anchor.
b. Disconnect the pretensioner connector as shown in the illustration.
c. Remove the 2 bolts and retractor.
