Tacoma 4WD V6-4.0L (1GR-FE) (2006)
3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
a. Slide the front seat to the most forward position.
b. Disengage the hook.
c. Disconnect the connector.
d. Using a clip remover, remove the wiring harness clamp.
e. Remove the wiring harness clamp.
f.
Remove the bolt and the front seat inner belt.
INSTALLATION
1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
a. Slide the front seat to the most forward position.