Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1417009.png)
a. for Separate Seat Type Driver Side:
1. Install the front seat inner belt with the nut.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
NOTE: Be careful not to place the front seat inner belt over the convex areas of the front seat with adjuster frame.
2. Check that the front seat inner belt rotates smoothly.
3. Connect the seat position sensor connector.
4. Install the 2 wire harness clamps and 2 connector clamps.
b. for Separate Seat Type Front Passenger Side and Separate Folding Seat Type:
1. Install the front seat inner belt with the nut.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
NOTE: Be careful not to place the front seat inner belt over the convex areas of the front seat with adjuster frame.
2. Check that the front seat inner belt rotates smoothly.
3. Install the wire harness clamp and connector clamp.
4. Connect the seat wire connector.
2. INSTALL FRONT SEAT ASSEMBLY
a. for Separate Seat Type Driver Side:
1. Install the front seat assembly.
b. for Separate Seat Type Front Passenger Side:
1. Install the front seat assembly.
c. for Separate Folding Seat Type:
1. Install the front seat assembly.
3. INSTALL SEAT TRACK COVER
a. for Separate Seat Type Driver Side:
1. Install the seat track cover.
b. for Separate Seat Type Front Passenger Side:
1. Install the seat track cover.
c. for Separate Folding Seat Type:
1. Install the seat track cover.
