toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Front Center Seat Outer Belt (For Bench Seat Type)|Page 7318 > < Front Center Seat Outer Belt (For Bench Seat Type)|Page 7316

Tacoma 4WD V6-4.0L (1GR-FE) (2006)

Page 35
background image

10. Install the floor anchor with the bolt.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf) 

11. Disconnect the pretensioner connector as shown in the illustration.

d. Connect the SST.

1. Connect SST, then connect the yellow connector to the seat belt pretensioner.

SST 09082-00700, 09082-00770

NOTE:  To avoid damaging SST connector and wire harness, do not lock the secondary lock of the twin lock.

Front Center Seat Outer Belt (For Bench Seat Type)|Page 7318 > < Front Center Seat Outer Belt (For Bench Seat Type)|Page 7316