Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1111005.png)
a. Install the spacer ring.
b. Using a socket 24 AF and 8 mm bi-hexagon wrench, install the pulley with the spring washer and nut.
Torque: 65 N.m (663 kgf.cm, 48 ft.lbf)
3. INSTALL BEARING SET GENERATOR
a. Align the 3 cutouts of the bearing set generator with the stator generator with rectifier.
4. INSTALL STATOR SUB-ASSEMBLY GENERATOR WITH RECTIFIER
a. Align the key of the drive end frame with the keyway of the stator sub-assembly generator with rectifier.
b. Install the stator generator with rectifier with the 4 bolts.
Torque: 4.3 N.m (44 kgf.cm, 38 in.lbf)
5. INSTALL REGULATOR SUB-ASSEMBLY GENERATOR WITH BRUSH
