Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1213003.png)
5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1
a. Disengage the clip and disconnect the oil reservoir to pump hose No. 1.
6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
a. Remove the union bolt, then disconnect the pressure feed tube.
b. Remove the gasket from the pressure feed tube.
7. REMOVE VANE PUMP
a. Disconnect the oil pressure switch connector.
b. Remove the bolt and wire harness clamp bracket.
c. Remove the 2 bolts and vane pump assembly.
DISASSEMBLY
