Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1244005.png)
9. REMOVE REAR SPRING SHACKLE SUB-ASSEMBLY NO. 2
a. Remove the nut, washer, through bolt and shackle.
DISASSEMBLY
1. REMOVE BUSH
a. Fix the spring in a vise.
b. Using a hack saw, cut both ends off the bushes.
c. Using SST and a press, press out the 2 bushes.
SST 09950-60010 (09951-00350), 09950-70010 (09951-07100)
d. Using a chisel and hammer, tap out the 2 outer tubes.
REASSEMBLY