Tacoma 4WD V6-4.0L (1GR-FE) (2006)
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
a. Install the shift solenoid valve S2 with the bolt.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
b. Install the shift solenoid valve S1 with the bolt.
Torque: 6.4 Nm (65 kgf-cm, 56 inch lbs.)
c. Install the shift solenoid valve SR with the 2 bolts.
Torque: 6.4 Nm (65 kgf-cm, 56 inch lbs.)
d. Install the shift solenoid valves SLU and SL2 with the pin, lock plate and bolt.
Torque: 6.4 Nm (65 kgf-cm, 56 inch lbs.)
e. Install the shift solenoid valves SLT and SL1 with the pin, lock plate and bolt.
Torque: 6.4 Nm (65 kgf-cm, 56 inch lbs.)
f.
Insert the pin of the lever into the hole of the manual valve.
g. Install 3 new drum seal gaskets onto the transmission case.
h. Install the 19 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
Bolt length:
Bolt A: 36 mm (1.42 inch)
Bolt B: 25 mm (0.98 inch)
2. INSTALL TRANSMISSION WIRE