Tacoma 4WD V6-4.0L (1GR-FE) (2006)
7.
Remove the clutch pedal shaft collar.
8.
Using needle-nose pliers, remove the No. 1 cushion from the clutch pedal.
9.
Install the clutch pedal No. 1 cushion on the NEW clutch pedal sub-assembly.
NOTE:
Install parts on the NEW clutch pedal sub-assembly BEFORE installing in the vehicle.
10.
Install the clutch pedal shaft collar.
A.
Apply MP grease to the clutch pedal shaft collar.
B.
Install the clutch pedal shaft collar onto the clutch pedal.