Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-920001.png)
Pressure Plate: Service and Repair
CLUTCH UNIT
Components
REMOVAL
1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY
2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
a. Remove the clutch release fork together with the clutch release bearing from the transmission assembly.
3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
a. Remove the clutch release bearing assembly from the clutch release fork.
4. REMOVE RELEASE FORK SUPPORT
a. Remove the release fork support from the transaxle assembly.
5. REMOVE RELEASE BEARING HUB CLIP
