Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-993001.png)
Transmission Position Switch/Sensor: Adjustments
ADJUSTMENT
ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Loosen the bolt of the park/neutral position switch and set the shift lever to the N position.
b. Align the groove and the neutral basic line.
c. Hold the switch in position and tighten the bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
d. After making an adjustment, perform the inspection described in step 1.
