Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1812002.png)
2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
a. Using a brush, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply Primer M to the adhesive.
-
Throw away any leftover Primer M.
-
Do not apply too much Primer M.
b. Using a brush or sponge, apply Primer G to the edge of the quarter window and contact surface.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
HINT: If Primer G is applied to any areas other than that which is specified, wipe off the primer with a clean shop rag before it dries.
