toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Wiper Switch > < Body - Windshield Wind Noise at Highway Speeds|Page 9561

Tacoma 4WD V6-4.0L (1GR-FE) (2006)

  • Wiper and Washer Systems
  • Sensors and Switches - Wiper and Washer Systems
  • Washer Fluid Level Switch
  • Component Information
  • Testing and Inspection

Page 1
background image

Washer Fluid Level Switch: Testing and Inspection

INSPECT WASHER FLUID LEVEL WARNING SWITCH 

a. Disconnect the washer level warning switch connector.
b. Turn the ignition switch to the ON position.
c. Ground the terminal of the wire harness side connector, then check the washer level warning light.

OK: Washer level warning light comes on.

d. Reconnect the washer level warning switch connector.

  • Wiper and Washer Systems
  • Sensors and Switches - Wiper and Washer Systems
  • Washer Fluid Level Switch
  • Component Information
  • Testing and Inspection

Wiper Switch > < Body - Windshield Wind Noise at Highway Speeds|Page 9561