Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1837003.png)
b. Using a "Torx" socket wrench (T30), remove the 2 screws and windshield wiper motor assembly.
INSTALLATION
1. INSTALL FRONT WIPER MOTOR
a. Apply DENSO No. 50 grease to the crank arm pivot of the windshield wiper motor assembly.
b. Using a "Torx" socket wrench (T30), install the windshield wiper motor assembly with the 2 screws.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
c. Install the 2 rods onto the crank arm pivot of the windshield wiper motor assembly.
