Tacoma Extra Cab 2WD L4-2.4L (2RZ-FE) (1999)
Load Compensator: Testing and Inspection
LOAD SENSING PROPORTIONING AND BY-PASS VALVE (LSP & BV) ON-VEHICLE INSPECTION
HINT: Pre runner is the described below.
RZN191L-TRPDKAB, RZN196L-CRPDKAB, VZN195L-CRPDKAB
1. SET REAR AXLE LOAD
Rear axle load (includes vehicle weight):
2. INSTALL LSP & BV GAUGE (SST) AND BLEED AIR
SST 09709 - 29018
3. RAISE FRONT BRAKE PRESSURE TO 7,845 kPa (80 kgf/cm2,1,138 psi) AND CHECK REAR BRAKE PRESSURE
Rear brake pressure:
HINT: The brake pedal should not be depressed twice and/or returned while setting to the specified pressure.
Read the value of rear brake pressure 2 seconds after adjusting the specified fluid pressure. If the brake pressure is incorrect, adjust the fluid
pressure.