Tacoma Extra Cab 2WD L4-2.4L (2RZ-FE) (1999)
11. REMOVE OIL PAN
a. Remove the 16 bolts and 2 nuts.
b. Insert the blade of Special Service Tool (SST) between the cylinder block and oil pan, cut off applied sealer and remove the oil pan.
(SST) 09032-00100
NOTICE: Be careful not to damage the oil pan flanges of the oil pan and cylinder block.
12. REMOVE OIL STRAINER
Remove the bolt, 2 nuts, oil strainer and gasket.
13. REMOVE CRANKSHAFT PULLEY
a. w/ A/C: Remove the 4 bolts, No.2 and No.3 crankshaft pulleys.
b. Using SST, remove the pulley bolt.
SST 09213-54015, 09330-00021
c. Remove the crankshaft pulley.
HINT: If necessary, remove the pulley with SST and crankshaft pulley bolt.
SST 09950-50012 (09951-05010, 09952-05010, 09953-05010, 09954-05020)
14. REMOVE TIMING CHAIN COVER