Tacoma Extra Cab 2WD L4-2.4L (2RZ-FE) (1999)
/Page-1246003.png)
a. Remove the 4 nuts.
b. Using SST, remove the rectifier end frame.
SST 09286-46011
6. REMOVE ROTOR FROM DRIVE END FRAME
REASSEMBLY
1. PLACE DRIVE END FRAME ON PULLEY
2. INSTALL ROTOR TO DRIVE END FRAME
3. INSTALL RECTIFIER END FRAME
a. Using a 29 mm socket wrench and press, slowly press in the rectifier end frame.
b. Install the 4 nuts.
Torque: 4.5 Nm (46 kg.cm, 40 in.lb)
