Tacoma Extra Cab 2WD L4-2.4L (2RZ-FE) (1999)
b. Using a press, press in a new front bearing.
17. INSPECT REAR BEARING
Turn the bearing by hand while applying inward force.
If resistance is felt or the bearing sticks, replace the bearing.
18. IF NECESSARY, REPLACE REAR BEARING
a. Using SST, remove the bearing.
SST 09286-46011
b. Using a press, press in a new rear bearing.
NOTE: Be careful of the bearing installation direction.
SST 09201-41020
19. DO PULL-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, check that there is continuity between terminals 50 and C.
If there is no continuity, check and replace the magnetic switch.