Tacoma Extra Cab 2WD L4-2.4L (2RZ-FE) (1999)
/Page-1328003.png)
a. As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
b. Using a torque wrench, turn the nut continuously 1 turn each 2 - 4 seconds and take the torque reading on the 5th turn.
Turning torque: 0.5 - 3.5 Nm (5 - 35 kgf-cm, 4 - 30 inch lbs.)
INSTALLATION
Installation Is in the reverse order of removal.
