Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Using Special Service Tool (SST) # 09023 - 00100, disconnect the 5 brake lines from the Anti-Lock Brake System (ABS) actuator.
Torque: 15 Nm (11 ft. lbs.)
2. Disconnect connectors.
Disconnect the 2 connectors from the actuator.
3. Remove control relay from actuator bracket.
4. Remove ABS actuator.
(a) Remove the 2 bolts, 2 nuts and ABS actuator assembly.
Torque: 19 Nm (14 ft. lbs.)
(b) Remove the bolt and connector clamp.
(c) Remove the 3 nuts and ABS actuator from the actuator bracket.
Torque: 5.4 Nm (48 inch lbs.)
(d) Remove the 3 holders and cushions from the ABS actuator.
INSTALLATION
Installation is in the reverse order of removal.
After installation, fill brake reservoir with brake fluid, bleed brake system. Refer to Brakes. See: Brake Bleeding/Service and Repair
Check for leaks.
