Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Knock Sensor: Service and Repair
KNOCK SENSOR REMOVAL
1. REMOVE STARTER
2. REMOVE FUEL FILTER SET BOLTS
3. REMOVE KNOCK SENSOR
(a) Disconnect the knock sensor connector.
(b) Using SST. remove the knock sensor. SST 09816-30010
KNOCK SENSOR INSTALLATION
1. REINSTALL KNOCK SENSOR
(a) Using SST. install the knock sensor. SST 09816-30010
Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)
(b) Connect the knock sensor connector.
6. REINSTALL FUEL FILTER SET BOLTS
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
7. REINSTALL STARTER
