Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Air Bag Harness: Testing and Inspection
Wire Harness
HINT: The SRS wire harness is integrated with the cowl wire harness assembly and floor wire harness assembly.
The wires for the SRS wire harness are encased in a yellow corrugated tube and all the connectors in the system are a standard yellow color.
INSPECTION ITEMS
1. VEHICLES NOT INVOLVED IN A COLLISION
Do a diagnostic system check.
2. VEHICLES INVOLVED IN A COLLISION
a. Do a diagnostic system check.
b. Check for breaks in all wires of the SRS wire harness, and for exposed conductors.
c. Check to see if the SRS wire harness connectors are cracked or chipped.
REPLACEMENT REQUIREMENTS
In the following cases, replace the wire harness or connector.
^
If any part of the SRS wire harness or any connector has been found to be faulty in troubleshooting.
^
If any part of the SRS wire harness or any connector has been found to be faulty during the check in items 2-(b) or (c).
NOTICE:
^
If the wire harness used in the SRS is damaged, replace the whole wire harness assembly.
