Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Ignition Lock Solenoid: Testing and Inspection
1. Inspect key interlock solenoid.
a. Disconnect the solenoid connector.
b. Using an ohmmeter, measure the resistance between terminals 3 and 4.
Standard Resistance: 12-17 ohms
If resistance value is not as specified, replace solenoid.
c. Touch the solenoid with your finger and check solenoid operation can be felt when battery positive voltage is applied intermittently to the
terminals 1 and 2.
If the solenoid does not operate, replace the solenoid.
*1: Column shift lever is not pulled.
*2: Column shift lever is not pulled toward you.
