Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
b. Check the back surface for wear and damage.
2. Inspect bearing.
a. Check the needle roller bearing for pockmarks or damage. If faulty, replace the rack housing.
b. Apply molybdenum disulfide lithium base grease to the inside of the bearing.
3. Inspect bushing.
a. Check the inside of the bushing of the cylinder end stopper for cracks. If faulty, replace the bushing.
b. Apply molybdenum disulfide lithium base grease to the inside of the bushing.
4. If necessary, replace oil seal.
a. Using SST 09950-60010 (09951-00320), 09950-70010 (09951-07100) and a hammer, tap out the oil seal from the bearing guide nut.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST 09950-60010 (09951-00280, 09951-00360, 09952-06010), 09950-70010 (09951-07100), press in the oil seal.
NOTICE: Make sure you install the oil seal facing the correct direction.
