Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Yoke: Bearing
With drill mark: With color mark (Red)
No drill mark: No color mark
5. Install spider bearings.
a. Apply MP grease to a new spider and bearings.
NOTICE: Be careful not to apply too much grease.
b. Align the matchmarks on the yoke and shaft.
c. Fit the spider into the yoke.
d. Using SST 09332-25010, install new bearings on the spider.
e. Using SST, adjust both bearings so that the snap ring grooves are at Maximum and equal widths.
DANA
6. Install snap rings.
a. Install 2 new snap rings of equal thickness which will allow 0-0.05 mm (0-0.0020 inch) axial play.
HINT: Do not reuse the snap rings.
Color: Thickness
Green: 1.384 mm (0.0545 inch)
Red: 1.435 mm (0.0565 inch)
Black: 1.486 mm (0.0585 inch)
Copper: 1.511 mm (0.0595 inch)
Silver: 1.537 mm (0.0605 inch)
Yellow: 1.588 mm (0.0625 inch)
Blue: 1.638 mm (0.0645 inch)
