toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

TMC Made|Page 4316 > < TMC Made|Page 4314
Page 4
background image

b. Using a hammer, tap the yoke until there is no clearance between the bearing outer race and snap ring.

7. Check spider bearing.

^

Check that the spider baring moves smoothly.

^

Check the spider bearing axial play.

Bearing axial play: Maximum 0.05 mm (0.0020 inch) 

HINT:  Install new spider bearings on the shaft side in the procedure described above.

TMC Made|Page 4316 > < TMC Made|Page 4314