Tacoma Extra Cab 2WD L4-2438cc 2.4L DOHC MFI (1997)
Reverse Idler Gear: Service and Repair
Assembly
Install synchronizer ring assembly to No.3 hub sleeve.
a. Push the synchronizer key spring, install the shifting key and key spring to the reverse synchronizer ring.
b. Using a screwdriver, push the 3 key springs into the synchronizer ring spring gaps.
c. Install the synchronizer cone ring to the reverse synchronizer pull ring and turn the pull ring.
d. Install the 5th synchronizer ring.
e. Install the reverse synchronizer ring.
f.
Turn the reverse synchronizer pull ring.
