Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
Technical Service Bulletin # AX010-97
Date: 970829
Body - Running Board Installation
ACCESSORY
AX010-97
Title:
TACOMA RUNNING BOARD INSTALLATION
Models:
'98 Tacoma 4x2 Xtracab
August 29, 1997
Introduction
Beginning with 1998 production of the Tacoma series, a modification in the installation of the running boards is required due to changes in the design of
the vehicle for the new model year The procedure as described in this bulletin is the revised installation which includes the correct positioning of the step
pad extension of the running board to the bed fender panel on 4x2 Xtracab models.
Affected Vehicles
^
1998 Model Year Tacoma 4x2 Xtracab models.
Parts Information
PART NUMBER
PART NAME
00535-35975
Tacoma Runningboard Kit, Xtracab, 4x2
Required Tools
Procedure Overview
Install supports on frame as shown following all instructions in consecutive order. Figure 1 gives an overall view of the installation.