toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Heater Control Valve > < Diagram Information and Instructions|Page 1606
Page 2
background image

(c) Connect the ECT sensor connector.

8. REINSTALL FUEL PIPE

Install the fuel pipe with 4 new gaskets and the 2 union bolts. 

Torque: 34.3 N.m (350 kgf.cm, 25 ft.lbf) 

9. REINSTALL NO.2 TIMING BELT COVER 

10. RECONNECT UPPER RADIATOR HOSE TO WATER OUTLET
11. REFILL WITH ENGINE COOLANT

Heater Control Valve > < Diagram Information and Instructions|Page 1606