Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
/Page-586001.png)
Camshaft Position Sensor: Testing and Inspection
CAMSHAFT POSITION SENSOR INSPECTION
(a) Disconnect the camshaft position sensor connector.
(b) Inspect the camshaft position sensor resistance. Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 835 - 1,400 k ohms
Hot: l,060 - 1,645 k ohms
If the resistance is not as specified, replace the camshaft position sensor.
(c) Reconnect the camshaft position sensor connector.
