Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
Stabilizer Bar: Service and Repair
REMOVAL
1. Remove front wheels.
Torque: 110 Nm (83 ft. lbs.)
2. Remove stabilizer bar.
a. Hold the bolt with a wrench, then remove the nut, retainer, collar and cushion from the lower suspension arm.
Torque: 39 Nm (29 ft. lbs.)
b. Remove the 4 bolts and stabilizer bar with the cushions and brackets.
Torque: 29 Nm (22 ft. lbs.)
c. Remove the brackets and cushions from the stabilizer bar.
HINT: At the time of installation, install the cushions to the inside of the paint mark.
INSTALLATION
Installation is in the reverse order of removal.