Tacoma Extra Cab 4WD L4-2.7L (3RZ-FE) (1999)
Fuel Pressure Regulator: Service and Repair
COMPONENTS
REMOVAL
1. DISCONNECT VACUUM SENSING HOSE FROM FUEL PRESSURE REGULATOR
2. DISCONNECT FUEL RETURN HOSE FROM FUEL PRESSURE REGULATOR
HINT: Put a suitable container or shop towel under the pressure regulator.
3. REMOVE FUEL PRESSURE REGULATOR
a. Remove the 2 bolts and fuel pressure regulator.
Torque: 8.8 Nm (90 kg.cm, 78 in.lb)
b. Remove the O-ring.
HINT: At the time of installation, please refer to the following item.
Use a new O-ring.
INSTALLATION
Installation is in the reverse order of removal.