toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/T - Delayed Upshift To O/D With Cruise Engaged|Page 58 > < Diagram Information and Instructions|Page 48
Page 1
background image

Cruise Control Module: All Technical Service Bulletins
A/T - Delayed Upshift To O/D With Cruise Engaged

BULLETIN NUMBER:
EL004-00

DATE:
April 14, 2000

TITLE:
DELAYED UPSHIFT TO OVERDRIVE WITH CRUISE CONTROL ENGAGED

MODELS:
'98 - '99 Tacoma

INTRODUCTION
A revised cruise control ECU is available for 1998-1999 Tacoma trucks with automatic transmissions. While cruise control is engaged, the new ECU
improves the upshift delay from 3rd to 4th gear after the vehicle comes over the crest of a hill. To correct the concern, replace the cruise control ECU
and perform the cable adjustment procedure as shown in this bulletin.

APPLICABLE VEHICLES:
1998 - 1999 (4 cylinder) Tacoma Trucks with automatic transmissions produced before the VIN's listed in the illustration.

PRODUCTION CHANGE INFORMATION

PARTS INFORMATION

WARRANTY INFORMATION

APPLICABLE WARRANTY*:

This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the
vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

REPAIR PROCEDURE:

A/T - Delayed Upshift To O/D With Cruise Engaged|Page 58 > < Diagram Information and Instructions|Page 48