Tacoma Extra Cab 4WD L4-2.7L (3RZ-FE) (1999)
/Page-1555003.png)
7. REMOVE NO. 1 AND NO. 2 SPRING BUMPERS
Using SST, remove the No. 1 and No. 2 spring bumpers.
SST 09922-10010
Torque: 23 Nm (235 kgf-cm, 17 ft. lbs.)
HINT: At the time of installation, use a torque wrench with a fulcrum length of 345 mm (13.58 inch).
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, check the front wheel alignment.
