Tacoma Extra Cab 4WD L4-2.7L (3RZ-FE) (1999)
a. Remove the shock absorber lower nut and washer.
NOTICE: Do not remove the bolt.
Torque: 135 Nm (1,400 kgf-cm, 101 ft. lbs.)
HINT: At the time of installation, after stabilizing the suspension, torque the nut.
b. With lowering the lower suspension arm, remove the bolt and disconnect the shock absorber.
3. REMOVE SHOCK ABSORBER WITH COIL SPRING
Remove the 3 nuts and shock absorber with the coil spring.
Torque: 64 Nm (650 kgf-cm, 47 ft. lbs.)
INSTALLATION
Installation Is in the reverse order of removal.
Disassembly and Assembly
DISASSEMBLY