Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
Depress MOTOR Switch And Brake Pedal
(h) Push and hold in the MOTOR switch for a few seconds.
(i) Depress the brake pedal and hold it for about 15 seconds. As you hold the pedal down, push the MOTOR switch for a few seconds. Check that
the brake pedal does not pulsate.
(j) Release the brake pedal.
7. Push MOTOR switch.
Depress MOTOR Switch
(a) Push and hold in the MOTOR switch for a few seconds.
(b) Stop the engine.
8. Disconnect actuator checker (SST) from actuator.
Disconnect the actuator checker (SST) and sub-wire harnesses (SST) from the actuator, control relay and body side wire harness.
SST 09990-00150, 09990-00200, 09990-00210, 09990 - 00370
9. Connect connectors.
(a) Connect the 2 connectors to the control relay.
(b) Connect the connector to the actuator.
10. Clear the Diagnostic Trouble Code (DTC).
