Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
6. w/ Power Steering (PS): Remove drive belt for PS pump.
Loosen the lock bolt and adjusting bolt, and remove the drive belt.
7. Remove fan shrouds.
(a)
Remove the 2 clips and No. 2 fan shroud.
(b) Remove the 4 bolts and No. 1 fan shroud.
8. w/ A/C: Remove drive belt for A/C compressor.
Loosen the idler pulley nut and adjusting bolt, and remove the drive belt.
9. Remove drive belt for generator, fan with fluid coupling and water pump pulley.
(a)
Stretch the belt and loosen the water pump pulley nuts.
(b) Loosen the lock, pivot and adjusting bolts of the generator, and remove the drive belt.
(c)
Remove the 4 water pump pulley nuts.
(d) Pull out the fan together with the fluid coupling and water pump pulley.
10. Remove water pump.
Remove the 10 bolts, water pump and gasket.
INSTALLATION
Installation is in the reverse order of removal.