toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/C - Liquid Tube Improvement|Page 1190 > < A/C - Liquid Tube Improvement|Page 1188
Page 4
background image

@ Compressor  7.2 ft/lbf (9.8 N.m, 100 Kgf/cm)
@ Evaporator 24 ft/lbf (32.3 N.m, 330 Kgf/cm)

CAUTION:

Maintain clearance between the suction hose and other parts.

A.

4 Cylinder (L4) engine models:

a.

Remove original suction hose.

b.

Install new suction hose.

B.

6 Cylinder (V6) engine models:

a.

Remove original suction hose.

b.

Route the new suction hose around the power steering hose to install.

3.

Perform Gas Charge and Leak Check procedures as explained in the A/C Installation Manual.

A/C - Liquid Tube Improvement|Page 1190 > < A/C - Liquid Tube Improvement|Page 1188