Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
Using an ohmmeter. measure the resistance between the terminals.
Resistance: Refer to the chart graph
If the resistance is not as specified. replace the ECT sensor.
4. REINSTALL ECT SENSOR
(a) Using a 19 mm deep socket wrench, install the ECT sensor and gasket.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
(b) Connect the ECT sensor connector.
(c) Install the engine wire protector to the 3 brackets.
5. REFILL ENGINE COOLANT
