Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
b. Install the wheel pad after confirming that the circumference groove of the torx screw is caught on the screw case.
NOTICE: Column Shift: Take care that the spiral cable does not touch the dynamic damper of the steering wheel.
c. Using a torx socket wrench, torque the 2 screws.
Torque to 9.0 Nm (78 inch lbs.)
d. Install the 2 steering wheel lower No. 2 covers.
9. Check steering wheel center point.