Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
Wheel Speed Sensor: Service and Repair
Front
Front Speed Sensor Components
REMOVAL
1. Remove speed sensor.
Disconnect Speed Sensor Connector
(a) Disconnect the speed sensor connector.
(b) Remove the 2 clamp bolts holding the sensor harness from the steering knuckle, upper arm and side rail.
Remove Clamp Bolts
(c) Remove the speed sensor installation bolt from the steering knuckle.
Torque: 8.0 Nm (82 kg.cm 71 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
After installation, check speed sensor signal.
CAUTION: Make sure that:
