Tacoma Extra Cab 4WD L4-2693cc 2.7L DOHC MFI (1997)
Alignment: Service and Repair
Front
Front
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to specification.
1. Measure vehicle height. If the vehicle height is not within the specification, try to adjust it by pushing down on or lifting the body.
Vehicle height (Front: A - B; Rear: C - D)
Measuring points:
A: Ground clearance of spindle center.
B: Ground clearance of front adjusting cam bolt center.
C: Ground clearance of leaf spring front hanger pin center.
D: Ground clearance of rear axle shaft center.
2. Install camber-caster-kingpin gauge or onto wheel alignment tester. Follow the specific instructions of the equipment manufacturer.
RZN161L
Camber: .................................................................................................................................................................................... 0°15' ± 45' (0.25° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Caster: ..................................................................................................................................................................................... 1° 35' ± 45' (1.58° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Steering Inclination: ................................................................................................................................................................. 10° 00' ± 45' (10° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
VZN160L
Camber: ................................................................................................................................................................................... 0° 15' ± 45' (0.25° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Caster: ..................................................................................................................................................................................... 1° 35' ± 45' (1.58° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
Steering Inclination: .............................................................................................................................................................. 10° 30' ± 45' (10.5° ± 0.75°)
Left/Right Error ............................................................................................................................................................................... 30' (0.05°) or less
